Copper to aluminum transition plates
Copper to aluminum transition plate is a kind of bimetallic plates with copper layer and aluminum layer transition, which is widely used in power equipment such as power distribution cabinet.
- Material:1060 Aluminum,T2 Copper
- Specification:Thickness:3mm-15mm
- Application:Electric equipment
Copper and aluminum are good conductor materials with high cost performance.It is widely used in power systems and is the main conductor material.General aluminum is used in high-voltage lines, copper is used in low-voltage distribution cabinet systems.Copper and aluminum cannot be directly connected, so how to reliably complete the connection between copper and aluminum conductors has a significant impact on the safe operation of the entire power system.
Traditional copper-aluminum connection materials are generally made by flash welding, friction welding, brazing and other processes. The mechanical properties, reliability, and electrical conductivity of their products have quality risks and hidden safety risks.In this case, we use advanced production technology to develop a new material for power fittings.
Through independent research and development, our company has developed copper aluminum composite clamps, copper to aluminum transition plate, and copper aluminum bimetallic washers. They have been widely used in the power industry to replace traditional processes, which not only improves product quality but also reduces production costs. It is an ideal copper-aluminum transition connection product.
Product size:
Thickness:3.0-15.0mm;Width:≤1000mm.
Features:
The copper-aluminum composite has high strength, realizes the metallurgical bonding between copper and aluminum, and solves the problems of low electrical conductivity, low mechanical strength and poor reliability of copper-aluminum joints. Low density saves costs and resources.
Technical Parameters:
Composite strength : ≥12N / mm
Compound rate : 100%
Shear strength : ≥35Mpa
Tensile strength : 90-150Mpa
Elongation : 0-35%
Traditional copper-aluminum connection materials are generally made by flash welding, friction welding, brazing and other processes. The mechanical properties, reliability, and electrical conductivity of their products have quality risks and hidden safety risks.In this case, we use advanced production technology to develop a new material for power fittings.
Through independent research and development, our company has developed copper aluminum composite clamps, copper to aluminum transition plate, and copper aluminum bimetallic washers. They have been widely used in the power industry to replace traditional processes, which not only improves product quality but also reduces production costs. It is an ideal copper-aluminum transition connection product.
Product size:
Thickness:3.0-15.0mm;Width:≤1000mm.
Features:
The copper-aluminum composite has high strength, realizes the metallurgical bonding between copper and aluminum, and solves the problems of low electrical conductivity, low mechanical strength and poor reliability of copper-aluminum joints. Low density saves costs and resources.
Technical Parameters:
Composite strength : ≥12N / mm
Compound rate : 100%
Shear strength : ≥35Mpa
Tensile strength : 90-150Mpa
Elongation : 0-35%
GET A QUOTE
| Thickness | Width | Compound rate | Composite strength | Tensile strength | Elongation | DC resistivity |
| 3.0-15mm | 600-1000mm | 100% | ≥12N/mm | 90-150MPa | ≥30% | ≤0.0245Ω•mm²/m |
1.What is the size of the copper to aluminum transition plates you produce?
The copper to aluminum transition plates we produce usually have a thickness ranging from 3-15mm and a maximum width of 1000mm.
2.What is the copper layer ratio of copper to aluminum transition plates?
The proportion of copper layer is usually 10% to 20%, which can be customized if there are special requirements.
3.What is your MOQ?
If the product you want is in stock, the quantity can be any number, if not, the MOQ is 3 tons.
The copper to aluminum transition plates we produce usually have a thickness ranging from 3-15mm and a maximum width of 1000mm.
2.What is the copper layer ratio of copper to aluminum transition plates?
The proportion of copper layer is usually 10% to 20%, which can be customized if there are special requirements.
3.What is your MOQ?
If the product you want is in stock, the quantity can be any number, if not, the MOQ is 3 tons.