Copper clad aluminum sheet plate
Our copper clad aluminum sheet plate include single-sided and double-sided with a thickness between 0.02 and 15 mm.
- Material:1060 Aluminum,T2 Copper
- Specification:0.02mm-15mm
- Application:Conductive,thermal,corrosion resistant,decorative
Introduction:
The copper clad aluminum sheet produced by our company adopts hot-melt rolling technology, including single sided copper clad aluminum sheet and double sided copper clad aluminum sheet.The proportion of the copper layer is generally 10% to 20%, and the thickness is between 0.02mm and 15mm. It can be customized according to customer needs.
Features:
1.Forming a good cross-section transition layer, greatly improving the peel strength of the copper clad aluminum plate.
2.Composite under high temperature and anaerobic conditions, no electrochemical corrosion between the two metals.
3.Excellent mechanical properties, able to meet various deep processing such as bending, drilling and deep drawing.
4.The density is small, the cost is saved, and the environment is not polluted.
5.Widely used, it can replace pure copper in various fields such as conductive, heat conduction, anti-corrosion, decoration, etc., saving more than 80% of pure copper.
6.The aluminum layer can be supplied in various states such as H18, H14/H24, and O temper depending on the customer's usage.
7.Wide processing range, can produce various specifications of products with thickness between 0.02-15mm and width ≤1000mm.
The copper clad aluminum sheet produced by our company adopts hot-melt rolling technology, including single sided copper clad aluminum sheet and double sided copper clad aluminum sheet.The proportion of the copper layer is generally 10% to 20%, and the thickness is between 0.02mm and 15mm. It can be customized according to customer needs.
Features:
1.Forming a good cross-section transition layer, greatly improving the peel strength of the copper clad aluminum plate.
2.Composite under high temperature and anaerobic conditions, no electrochemical corrosion between the two metals.
3.Excellent mechanical properties, able to meet various deep processing such as bending, drilling and deep drawing.
4.The density is small, the cost is saved, and the environment is not polluted.
5.Widely used, it can replace pure copper in various fields such as conductive, heat conduction, anti-corrosion, decoration, etc., saving more than 80% of pure copper.
6.The aluminum layer can be supplied in various states such as H18, H14/H24, and O temper depending on the customer's usage.
7.Wide processing range, can produce various specifications of products with thickness between 0.02-15mm and width ≤1000mm.
GET A QUOTE
| Product type | T2 Copper 1060 Aluminum |
| Copper layer ratio | 10%-20% |
| Density（g/m³） | 3.94 |
| DC resistivity | ≤0.0245 |
| Tensile strength（Mpa） | ≥110 |
| Peel strength（N/mm） | ≥12 |
| Bond strength(Mpa) | ≥40 |
| Melting point（℃） | 550 |
1.Is the copper layer single-sided or double-sided?
Both single and double sides can be produced, according to customer needs.
2.What is the thickness of the copper clad aluminum plate?
The thickness between 0.02mm and 15mm, customized according to customer needs.
3.What is the ratio of the copper layer?
Usually the proportion of the copper layer is between 10% and 20%. If the customer has special needs, other proportions can also be customized.
4.What is the mechanical processing performance of copper clad aluminum sheet?
Its processing properties are very good and can meet the requirements of cutting, sawing, bending and punching.
5. Is the conductivity of the copper clad aluminum plate good?
Its conductivity is very high, and when the proportion of the copper layer reaches 20%, the current carrying capacity can reach 89% of the copper row.
6.Does it save costs?
The copper clad aluminum sheet has a density of 3.94 g/cm3 and a conductivity of 71% of T2 copper. Under the same conditions, the weight is less than half of that of pure copper, which has a significant cost advantage.
Both single and double sides can be produced, according to customer needs.
2.What is the thickness of the copper clad aluminum plate?
The thickness between 0.02mm and 15mm, customized according to customer needs.
3.What is the ratio of the copper layer?
Usually the proportion of the copper layer is between 10% and 20%. If the customer has special needs, other proportions can also be customized.
4.What is the mechanical processing performance of copper clad aluminum sheet?
Its processing properties are very good and can meet the requirements of cutting, sawing, bending and punching.
5. Is the conductivity of the copper clad aluminum plate good?
Its conductivity is very high, and when the proportion of the copper layer reaches 20%, the current carrying capacity can reach 89% of the copper row.
6.Does it save costs?
The copper clad aluminum sheet has a density of 3.94 g/cm3 and a conductivity of 71% of T2 copper. Under the same conditions, the weight is less than half of that of pure copper, which has a significant cost advantage.